To maintain the optimal performance of your Bissell Little Green cleaning machine, regular cleaning and maintenance of its components are essential. The collection tank is one of the most important components that needs occasional attention to ensure it remains free of debris and dirt. Disassembling the collection tank is a simple task that can be easily performed by following a few simple steps. In this comprehensive article, we will guide you through the process of taking apart the Bissell Little Green collection tank, providing detailed instructions and tips to make the task effortless.

Image: vanlifewithadog.blogspot.com

Understanding the Bissell Little Green Collection Tank

The collection tank is a crucial part of the Bissell Little Green machine as it stores the dirty water and debris extracted from carpets and upholstery during cleaning. Regular emptying and cleaning of the collection tank are necessary to ensure the machine’s efficiency and prolong its lifespan. Ignoring the maintenance of the collection tank can lead to reduced suction power and potential clogging, affecting the overall cleaning performance of the machine.

Step-by-Step Disassembly Guide

1. Remove the Collection Tank

   Start by unplugging the Bissell Little Green machine from the power outlet for safety precautions. Locate the collection tank, which is usually situated at the back of the machine. Grasp the tank firmly with both hands and pull it straight up to detach it from the main unit.

2. 
   Image: topvacuumparts.com

   Disconnect the Dirty Water Hose

   Once the collection tank is separated from the machine, turn it upside down. You will notice a dirty water hose connected to the bottom of the tank. To disconnect it, squeeze the two tabs located on the sides of the hose connector and gently pull the hose downward to release it.

3. Remove the Float and Filter

   Inside the collection tank, you will find a small float and a cylindrical filter. The float is usually made of black foam material and is responsible for indicating when the tank is full. To remove it, simply lift it out from its position. The filter, located beneath the float, can be removed by pulling it upward.

4. Separate the Tank Components

   The collection tank consists of three main components: the upper tank, lower tank, and a small black gasket. To separate these components, carefully turn the upper tank upside down and gently tap its edges on a flat surface to loosen its grip on the lower tank. Once the tanks are separated, remove the black gasket located between them.

5. Clean and Inspect the Components

   With the collection tank disassembled, thoroughly clean each component. Rinse all the parts with clean water to remove any dirt or debris. Use a mild detergent solution if necessary to remove stubborn stains. Carefully inspect the components for any damage or wear and tear. If any of the parts show signs of damage, consider replacing them to ensure optimal performance.

6. Reassemble the Tank

   Once the components are cleaned and inspected, reassemble the collection tank in reverse order of disassembly. Firstly, place the black gasket between the upper and lower tanks. Carefully align the tanks and snap them together. Insert the filter into the designated slot and place the float back in its position. Finally, connect the dirty water hose to the bottom of the collection tank.

How To Take Apart Bissell Little Green Collection Tank

Additional Tips

• Before reassembling the collection tank, ensure that all the components are completely dry to prevent mold or mildew growth.
• During reassembly, check that the black gasket is properly seated between the upper and lower tanks to prevent water leakage.
• If you encounter any difficulty while disassembling or reassembling the collection tank, refer to the user manual of your specific Bissell Little Green model for model-specific instructions and guidance.
• When cleaning the collection tank, avoid using harsh chemicals or abrasive cleaning agents as they may damage the components.
• For optimal performance of the Bissell Little Green machine, it is recommended to empty and clean the collection tank after each use, especially if it is heavily soiled.